Gyms Telescopic Retractable Gym Seating HDPE Material With Self Storing End Rails

Gyms Telescopic Modular Grandstands with Self Storing End Rails

Specification

Description

Designed with anatomically contoured seat surface using blow molded construction that allow form-fit deflection for maximum spectator comfort. Cantilevered to the rear to provide not less than 75mm smooth toe space beneath the seat.

Power Operation

A. Integrated Power: Furnish and install an integral automatic electro-mechanical powered frame propulsion system, to open and close telescopic seating. Integral Power and Control System shall be CE stamped and tested.

B. Limit Switches: Furnish and install both open and closed limit switches for the integral power system. The limit switches will automatically stop integral power operation when seating has reached the fully extended or closed position.

C. Motion Monitor: Provide flashing light with self-contained warning horn mounted to the telescopic seating for audio and visual warning during integral power operation.

D. Electrical: Seating Manufacturer shall provide all wiring within seating bank including remote control device.

Features

1) The Echo Bench can be provided within our unique VIP design

2) Seat module shall have recessed pockets to accept seat number plates.

3) Each end of row shall be enclosed with metal end cap. End caps shall be designed flush

with screw fixing Row letters Optional.

Understructure Introduction

A.Frame System:

1) Wheels: Wheels with non-marking poly urethane face to protect wood and synthetic floor surfaces, with molded-in metal bush and bearing to fit a10mm diameter axles secured with C Clips.

2) Slant Columns: Tubular Shape Steel (RHS).

3) Deck Stabilizer: Steel components bolted to nose and riser at three locations per section. Interlocks with adjacent stabilizer on upper tier using low-friction nylon roller to prevent separation and misalignment.

4) Deck Support: Securely captures decking for entire length of section.

B.Deck System:

1) Section Lengths: Each bank shall contain sections not to exceed 5980mm in length with a minimum of two supporting frames per row, each section.

2) Rear Riser: Continuous roll formed steel members

3) Nosing: Continuous Tubular Steel Section (RHS)

4) Deck End Overhang: Not to exceed frame support by more than 1715mm.

Application

foldable bleacher seats

movable auditorium seating

Gyms Telescopic Retractable Gym Seating HDPE Material With Self Storing End Rails Images